SR McCord oiler parts needed

You MUST Register with your REAL NAME, LOCATION, and EMAIL ADDRESS. Otherwise, you will be banned and deleted. This help prevent spam.
Post Reply
JVanMaanen
Posts: 43
Joined: Sat Jun 20, 2015 2:35 pm

SR McCord oiler parts needed

Post by JVanMaanen » Thu Jun 07, 2018 10:30 pm

I have an 07 style oiler on my 08 SR and need the 3 bushings part#1248 that the bleeders thread into. 1/4 to 1/8 pipe thread seem close, but doesn't seem like the thread should have as much taper. Anybody know what the thread sizes are for the bushings or where I can get some? Also seems like if they do not thread in to the proper depth they won't tension the check ball spring below the bleeder properly.

also could use one of the oiler pipe check valves or at least some idea of how strong a valve to use.

thanks Jim

JVanMaanen
Posts: 43
Joined: Sat Jun 20, 2015 2:35 pm

Re: SR McCord oiler parts needed

Post by JVanMaanen » Mon Jun 11, 2018 5:00 pm

The thread sizes should read 1/8 female pipe to 3/8 male pipe for the bushings in my post. Sorry for the mistake

Jim

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests