Valve Springs

You MUST Register with your REAL NAME, LOCATION, and EMAIL ADDRESS. Otherwise, you will be banned and deleted. This help prevent spam.
BillWitmer
Posts: 5
Joined: Sun Nov 01, 2015 11:34 pm

Valve Springs

Post by BillWitmer » Wed Sep 20, 2017 9:56 pm

Does anyone have a sorce for tappered or bee-hive shaped valve springs? Any help appreciated.

User avatar
ddunlavy
Site Admin
Posts: 156
Joined: Thu Jun 04, 2015 2:59 pm
Location: Decorah IA USA
Contact:

Re: Valve Springs

Post by ddunlavy » Fri Sep 22, 2017 1:48 pm

Last I knew Richard Darling had some made and were available.
ford06darling at usafamily.net
Dave

BillWitmer
Posts: 5
Joined: Sun Nov 01, 2015 11:34 pm

Re: Valve Springs

Post by BillWitmer » Fri Sep 22, 2017 9:56 pm

Thank you Dave. Much appreciated.

User avatar
ddunlavy
Site Admin
Posts: 156
Joined: Thu Jun 04, 2015 2:59 pm
Location: Decorah IA USA
Contact:

Re: Valve Springs

Post by ddunlavy » Sat Sep 23, 2017 12:39 pm

My mistake - Richard's email is usfamily.net not usafamily.net.
Sorry folks.
Dave

John Biggs
Posts: 28
Joined: Mon Jun 08, 2015 7:32 am

Re: Valve Springs

Post by John Biggs » Mon Sep 25, 2017 7:55 am

Bill

What model car do you need springs for? On the NRS, the inlet and exhaust springs are of different strength.

John

BillWitmer
Posts: 5
Joined: Sun Nov 01, 2015 11:34 pm

Re: Valve Springs

Post by BillWitmer » Mon Sep 25, 2017 10:31 am

John, Thank you for your reply. The car is a 1910 Schacht.

John Biggs
Posts: 28
Joined: Mon Jun 08, 2015 7:32 am

Re: Valve Springs

Post by John Biggs » Mon Sep 25, 2017 3:14 pm

Bill

Then I cannot help. I have some Ford NRS springs and could have brought them to Hershey next week.

John

p.schaefer
Posts: 9
Joined: Tue Jun 09, 2015 12:46 pm

Re: Valve Springs

Post by p.schaefer » Tue Sep 26, 2017 10:11 am

John, I could use a set if you can bring them along. I have spaces in the chocolate field with Dan Walters, Thanks. Paul

bvansloun
Posts: 87
Joined: Mon Jun 29, 2015 8:19 pm

Re: Valve Springs

Post by bvansloun » Tue Sep 26, 2017 1:27 pm

If you need, I can get some from Richard Darling, who has the different intake and exhaust beehive springs made up for the NRS over to a friend of mine, Greg Loftness, who will be on the Chocolate Field.

John Biggs
Posts: 28
Joined: Mon Jun 08, 2015 7:32 am

Re: Valve Springs

Post by John Biggs » Tue Sep 26, 2017 1:38 pm

Paul

I will bring them to the EFR meeting on Thursday. See you there.

John

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests